TTB Ball Joints

sirhk100

Well-Known Member
How hard is it to change the ball joints on the Ford 4WD TTB. My lower joints are loose and need replaced so I'm going to do it before I bother taking it in for an alignment or getting the beams bent (see my other thread). Is this something a knowledgable home mechanic can tear apart to the point where I can go have the new ones pressed in or is it worth just having it done. What's involved? Is it just pulling the hub, spindal, axle, and knocking the knuckle out? That's all it seems to be? How difficult is that? I've never done it but it doesn't look too bad!!!

'99YZ400,
'92 Ford Exploder lifted work in progress,
lifted golf cart
 

Kritter

Krittro Campbell
It is not too hard if you have a ball joint press or similar press type tool. I'd call it a 18 pack job for two people.

Kris

"Revenge is best served cold"
 
Top