Upper A arm mount change OR extend A arm

kramnamhoh

Member
Posts
8
Reaction
1
Hi All !!

My relatively new-to-me prerunner has a problem with the front wheel camber. The adjustment available is far from being adequate for setting the camber. It's as if the upper A-arm frame mounts are not far enough from the vehicle centerline to adequately set the camber. From my crude measurements, the passenger side mount is about 1 inch too close to midline , and the driver side is about 2 inches too close to midline.

Geiser Brothers suggested extending the A arm length. That seems to be the more expensive, though possibly correct option.

Has anyone had experience with a similar issue? Is extending the upper A arm length the best way to solve this issue?

thanks!!
 

Attachments

  • 20210102_111425_resized.jpg
    20210102_111425_resized.jpg
    2 MB · Views: 16
  • 20210102_111359_resized.jpg
    20210102_111359_resized.jpg
    2.5 MB · Views: 16
  • 20210101_170916_resized.jpg
    20210101_170916_resized.jpg
    1.9 MB · Views: 17
  • 20210101_170925_resized.jpg
    20210101_170925_resized.jpg
    1.9 MB · Views: 15
Top