whats the best intake to use?

mxnocean

Well-Known Member
Joined
Jun 11, 2008
Posts
176
Reaction
3
Location
Grover Beach, CA
My application. 74 chevy truck. sbc 350 .30 over. 11.5:1 compression, flat top pistons 750 carb 2.02 heads. 3:73 gears using it for sand drags. whats the best intake to use?
 

mebuildit

Well-Known Member
Joined
Sep 1, 2006
Posts
232
Reaction
15
Location
Scottsdale, Arizona
Get an open air design, it will keep your intake a little cooler. let's the air between the Carb and valley breathe.
 

griffin #11

Well-Known Member
Joined
Sep 7, 2009
Posts
60
Reaction
0
Location
CA
yeah id go single plane or even tunnel ram if your going to be screaming it. single planes usually work from about 4000 to 8500 rpm. and tunnel rams are usually good for 2800-3000 to 8000. tunnel rams are cool because u can have that big scoop comming out your hood grabbin that cool air. and single planes keep it all under the hoods so no body knows whats in it...good luck man!
 

Baja Fool

Well-Known Member
Joined
Sep 10, 2007
Posts
1,867
Reaction
474
Location
Cohabuzo Junction/SoCal
If you are going single plane and high rpm, then you better run some 5.38s with those big paddles. 3.73s ain't gonna get'er done.
 
Top