Reply to thread

Message: <blockquote data-quote="MTPyle" data-source="post: 1980982" data-attributes="member: 52157">Jcorsico,The truck would not transfer the weight forward under braking. It was like one of those horses that slide when they stop but leaned way back. haha And it just had too much balance to the back and would not bite up front. It had a push where it would not turn. But in order to get the ride height and balance right we had to raise the truck slightly and use more pre load. So we re putting on 50lb more spring rate in the rear so we can lower and take out the pre load. All I know is SDG knows what they are doing. Its all math based and their models agree with the real world. Pretty cool.Mike</blockquote>